How to Install a Kraus Kitchen Sink Faucet
Kraus kitchen sink faucets are some of the best on the market today. With features like automatic water detection and temperature adjustment, Kraus faucets are perfect for anyone who wants to make their life a little easier.
Installing a Kraus kitchen sink faucet is easy! In just a few simple steps, you can have your new sink faucet up and running. This guide will walk you through the installation process, step by step. So, whether you're a DIY novice or an experienced installer, you can easily install your own Kraus kitchen sink faucet. Let's get started!
Tools and Materials For Kraus Kitchen Faucet Installation
- Adjustable wrench
- Allen wrench
- New Kraus kitchen faucet kit
- Silicone caulk [optional]
Instructions on Installation of Kraus Kitchen Faucet
Video: Kraus Installation Series – QuickDock™ Technology
Disconnect the Existing Faucet
Before you begin installing your new Kraus kitchen sink faucet, it's important to disconnect the power supply to your kitchen sink. This will ensure that you don't accidentally electrocute yourself while working on the sink. Once the power is disconnected, begin by shutting off the water supply, then use an adjustable wrench to remove the existing faucet.
Install the Spout of Kraus Sink Faucet
With the old kitchen faucet removed, it's time to begin installing the new Kraus kitchen sink faucet. Start by attaching the spout to the sink, then attach the handles. Thread the mounting screws into the mounting nut making sure they're only a few threads in.
Put the foam gasket on the spout and push the spout through the desired hole in the sink. From the bottom, screw the mounting nut and metal washer hand tight all the way up to the underside of the sink. When you have hand-tightened the mounting nut as much as possible, use a screwdriver to tighten the screws a little more to ensure a snug fit. You don't want the spout to be able to wiggle around.
Install the Valve Stem of Kraus Kitchen Faucet
Now it's time to install the valve stem. Slip the foam gasket up around the tubes. Position it in the groove at the base of the valve. Push the tubes through the sink's hole while holding the gasket in place. Center the valve by aligning the lower tube with the mounting bracket.
As you tighten, make sure that the valve stays straight, facing the direction it needs to because sometimes it can move a little when tightening. This ensures that your Kraus kitchen faucet is facing the right direction when it's installed.
Install a Sprayer Hose
If you're installing a sink with a sprayer, especially a pull-down Kraus kitchen faucet, the process is pretty similar to the one above.
Once you know how to replace the Kraus kitchen faucet sprayer hose, then you’ll be good to go. First, install the sprayer head onto the threaded end of the hose and hand tighten it only. Attach the hose guide onto the other end of the hose and feed it through the underside of the sink. Remove the hose guide and feed the weight onto the hose.
Connect the Kraus sprayer hose to the valve hose by pushing them together. Secure them by installing a clip to hold them in place. Pull the sprayer hose out and check that when you do, the sprayer hose does not catch on anything under the sink. If the hose gets tangled up during the installation, it can make it difficult to use the sprayer.
Connect the Water Lines
Shut off the water at the shut-off valves beneath the sink. If there are no shut-off valves, shut off the water at the main valve to the house. Place a bucket beneath the P-trap to catch any water that may spill out when you disconnect the lines.
Use an adjustable wrench to loosen the compression nuts on the water lines. Be careful not to over-tighten or strip the threads.
Install the Kraus Faucet Trim
Install the decorative escutcheon plate over the hole in the sink. Attach the Kraus faucet trim to the escutcheon plate using the screws with the trim kit. Make sure that all o-rings and gaskets are in place before you screw on the trim. Connect the handles to the faucet using the screws that come with the handles.
Also, determine whether or not to use a gasket. This will depend on the type of counter or sink you have. If you have a three holes faucet but wish to install a single-hole Kraus faucet, then you must use a gasket. If your counter or sink has only one predrilled hole, you can install the faucet directly on top of it without using a gasket.
The gasket is provided by the majority of Kraus products. However, not all do, and you may be required to purchase it individually. Make sure you cover all the mounting holes with a gasket. If you're installing the faucet through a single mounting hole, then omit the gasket and place the new Kraus kitchen faucet.
Check for Leaks
Now that your Kraus faucet is installed, it's time to check for leaks. Begin by turning on the water at the shutoff valves, and then turn on each handle of your faucet. Move each handle back and forth to make sure they're working properly. Finally, turn off each handle and check under the sink for any drips. If there are any, tighten the connection until the leak stops.
Before using the new Kraus kitchen faucet, flush out the sprayer hose. Pull out the sprayer head and unscrew it from the sprayer hose, ensuring to hold onto the sprayer hose. Run some water through the hose to clear out any debris that may be clogging it. Then screw the aerator back on and reattach the sprayer head.
Check for leaks several hours after the installation and once again the next day. Even a very small water leak under the sink can lead to mold and cabinet damage over time.
FAQs on Installing Your Kraus Kitchen Faucet
Is plumber paste required when installing Kraus kitchen faucets?
No, a plumber's paste is not required when installing Kraus kitchen faucets. However, many people find it helpful to use a plumber's paste to ensure a tight seal between the faucet and the sink.
Why install a Kraus kitchen faucet?
Installing Kraus kitchen is a good investment for your kitchen because it will last longer than any other faucet product. If you’re also looking for the best kitchen faucet with a sprayer, then Kraus is a good option.
Which is better, plumber's paste or silicone for sealing a Kraus kitchen faucet?
Silicone putty is great for fixing leaks because it's waterproof and flexible. It also forms a strong bond with most surfaces, so it won't come loose over time.
Plumber's putty, on the other hand, is much easier to work with and usually gives a better seal. However, it's not as flexible as silicone putty, so it may not last as long. Ultimately, the best option for sealing a faucet depends on the situation.
How to remove Kraus kitchen faucets?
To remove your Kraus kitchen faucet, start by shutting off the water supply to the faucet. Next, use a wrench to loosen the screws that secure the faucet to the sink. With the screws removed, you should be able to lift the faucet off of the sink. If you have a sprayer attached to your Kraus faucet, you will need to disconnect the hose from the sprayer before you can remove the faucet.
How do you choose Kraus kitchen faucets?
Just like choosing other kitchen faucets, there are some factors you need to consider when choosing the best Kraus kitchen faucet. These include the price, warranty, size and shape, and features you’re looking into.
Final Thought on How to Install Your Kraus Kitchen Faucet
Installing Kraus kitchen faucets is a relatively straightforward process. However, if you are not comfortable performing the installation yourself, you can always hire a professional to do it for you.
Be sure to read all of the instructions that come with your Kraus kitchen faucet before beginning the installation process. This will help you to avoid making any mistakes that could cause damage to your sink or faucet.
Checkout some more faucet installations by brand in the chart below.
Kitchen Sink Faucet Installation by Brand
- Kohler Faucet Installation
- Akicon Faucet Installation
- Hansgrohe Faucet Installation
- Kingston Brass Faucet Installation
- T&S Brass Faucet Installation
- WestBrass Faucet Installation
- Karran Faucet Installation
- Rohl Faucet Installation
- American Standard Faucet Installation
- Gerber Faucet Installation
- Dishmaster Faucet Installation
- Zurn Faucet Installation
- Transolid Faucet Installation
- Delta Faucet Installation
- Pfister Faucet Installation
- Moen Faucet Installation
- Kraus Faucet Installation
- Nuvo Faucet Installation
- Newport Brass Faucet Installation
- Grohe Faucet Installation
- AXOR Faucet Installation
- Signature Hardware Faucet Installation
- Houzer Faucet Installation
- Waterstone Faucet Installation
- Vigo Faucet Installation
- Peerless Faucet Installation
Download Free Chart Now!
Your email will be used only to confirm your request and to provide free kitchen information. By submitting your info on this form, you are agreeing to be contacted regarding your service request by means of email. This is no obligation form and doesn’t require you to purchase any service.