An annoying and irritating issue might arise from a damaged toilet lever, particularly if you need to use the restroom immediately. Just like in what you learned about how to flush a toilet without the handle, it's crucial to solve the issue as soon as you can because being unable to flush the toilet can be very uncomfortable and inconvenient. Fortunately, you can still flush the toilet without a working lever by using a few different methods. Let's dive into how to flush toilet when lever is broken!
Solution 1: Fix the Broken Lever
Even with the best flushing toilets it can be challenging and annoying if your toilet handle is damaged. Thankfully, replacing a damaged toilet lever is a reasonably straightforward procedure that only requires a few basic tools and materials. So, how to flush toilet when lever is broken? Fix it!
How to Fix the Broken Lever
When you're learning how to flush toilet when lever is broken, you can fix it by following these steps:
- Turn off the water supply: Cutting off the water supply to the toilet is the first step in repairing a broken lever. You can either turn the valve behind the toilet to the off position or close the main water valve in your home to accomplish this.
- Lift the tank's lid: The tank lid should be raised and placed in a secure location.
- Remove the lever: Find and remove the metal rod connecting the lever and the flapper. The nut at the back of the lever can be loosened to do this.
- Take the lever out: The toilet lever can be removed by unscrewing the nut holding it in place.
- Putting in the new lever: Retighten the nut after inserting the replacement lever into the toilet's opening.
- Reattaching the metal rod: Tighten the nut after reconnecting the metal rod to the new lever.
- Restart the water supply: Restart the water flow and look for any leaks.
- Examine the flush: To make sure the lever is functioning properly, test the flush.
Tools and Materials Needed
When using this method as a solution to how to flush toilet when lever is broken, you'll need the following tools or materials:
- A flexible wrench
- New toilet handle
Possible Issues That May Occur When Repairing the Lever and How to Solve Them
Of course, learning how to flush toilet when lever is broken is easy but there are some instances where it's not so straightforward:
- The metal rod that links the lever to the flapper should be checked if the lever is still not functioning after being replaced. You may need to make adjustments to it to ensure that it functions properly if it is too long or too short.
- When flushing the toilet, if the water continues to flow or there's something wrong with the toilet bowl water level adjustment, the flapper could be jammed open. If the flapper needs to be replaced, try adjusting it.
- The lever might not operate correctly if it is loose. Verify that the nut holding the lever in place is tightly tightened. Very little water pressure is present. The toilet could not flush completely if there is insufficient water pressure. Make sure the water supply valve is fully open by checking it.
Solution 2: Use a Makeshift Lever
An improperly functioning flapper can cause continuous water flow from the tank into the bowl, which can result in excessive water bills. If you know how flushing toilets work, the answer to how to flush toilet when lever is broken is to simply make a new lever!
How to Build a Makeshift Lever
You'll need some simple tools, like a screwdriver and a pair of pliers, as well as some materials, like a coat hanger, a wooden spoon, or even a plastic ruler, to produce a makeshift lever. Assuming you have the necessary supplies, you can bend a wooden spoon or coat hanger into a shape that will fit your toilet's piping. The flapper can then be adjusted such that it properly seals using the temporary lever.
Because it's simple to bend and shape and robust enough to withstand the strain of changing the flapper, a coat hanger is a popular option. If you're concerned about damaging the porcelain of your toilet bowl, a wooden spoon is a decent alternative. In addition, if you have some lying around, you might use a piece of PVC pipe or a plastic ruler.
Use of a Makeshift Lever: Benefits and Disadvantages
One of the main benefits of employing a homemade lever is that it's a quick and simple fix that can help you avoid having to spend money on plumbing repairs.
However, if you're using this solution after learning how to flush toilet when lever is broken, it might only be a short-term solution until you can get a pro to address the issue correctly. I might not be as efficient as other options, and you might need to periodically adjust the flapper to avoid it from leaking. Also, if you're not careful, you may unintentionally harm the flapper or the plumbing of your toilet, which could result in future repairs that are more expensive.
Solution 3: Flush the Toilet Manually
Manual flushing is one alternative when you're learning how to flush toilet when lever is broken. By raising the flapper in the tank, waste can be flushed away by water flowing into the bowl.
How to Flush Toilet When Lever is Broken Manually
Here's what you need to know about how to flush toilet when lever is broken manually:
- Turn off the water supply to the toilet before manually flushing it to stop the tank from refilling while you're working. The flapper valve can then be found at the bottom of the tank after removing the tank lid.
- As soon as the water has completely drained from the tank and the bowl has been cleaned, lift the flapper valve with one hand and keep it there.
- Release the flapper valve after the bowl is empty to let the tank fill up.
- Restarting the water supply will allow you to check that the toilet is flushing properly.
To avoid any unintentional harm, it's vital to take safety measures when manually flushing the toilet, such as donning gloves and keeping away from any plumbing fixtures. It's also advised to call a qualified plumber to inspect and fix the damaged toilet lever if the issue continues.
Bottom Line: How To Flush Toilet When Lever Is Broken
Learning how to flush toilet when lever is broken will help you save needless frustration when dealing with a damaged toilet lever. It's important to note that routine upkeep and inspections can significantly reduce the likelihood that the toilet lever will break in the first place.
Addressing problems with your toilet as soon as you discover them, such as delayed flushing or a toilet that keeps running, will help stop future harm. You can make sure that your toilet is running properly and avert the annoyance of a broken toilet lever this way!
How To Flush Toilet When Lever Is Broken FAQs
How to flush toilet when lever is broken?
There are a few fixes you can try if your toilet's lever breaks. Fixing the broken lever is one alternative, which entails shutting off the water supply, raising the tank lid, removing the metal rod and the lever, replacing the broken one with a functioning one, and reconnecting the metal rod. Another option is to create a temporary lever by bending a coat hanger, a wooden spoon, or a plastic ruler into a shape that will fit your toilet's pipework, then using the temporary lever to adjust the flapper so that it correctly seals. The third option is to manually flush the toilet by lifting the flapper within the tank.
How do I fix my toilet's broken lever?
The water supply must be turned off, the tank lid must be lifted, the metal rod connecting the lever and the flapper must be removed, the nut holding the lever in place must be unscrewed, a replacement lever must be inserted into the toilet's opening, the metal rod must be reconnected, the nut must be tightened, the water supply must be turned back on, and the flush must be tested. To complete this task, you'll need a screwdriver, a flexible wrench, and a fresh toilet handle.
What supplies and tools will I need to improvise a toilet lever?
You will need some basic tools, like a screwdriver and a pair of pliers, as well as some materials, like a coat hanger, a wooden spoon, or a plastic ruler, to create a temporary toilet lever. You can shape a wooden spoon or coat hanger to fit the plumbing in your toilet, then use the temporary lever to adjust the flapper so that it correctly seals.
What are the pros and downsides of utilizing a temporary toilet lever?
One of the main advantages of employing a temporary toilet lever is that it's a quick and inexpensive remedy that can save you money on plumbing repairs. But, it might just be a temporary fix until you can get a specialist to deal with the problem properly. It might not be as effective as other choices, and to keep the flapper from leaking, you might need to adjust it on a regular basis. However, if you're not careful, you could unintentionally damage your toilet's flapper or piping, which could necessitate more costly future repairs.
If the lever breaks, how can I manually flush the toilet?
If the lever on the toilet is broken, you can still flush it manually by turning off the water supply, taking off the tank lid, finding the flapper valve at the bottom of the tank, lifting it with one hand and holding it there, and then letting go when enough water has flowed into the bowl to flush the waste.