When it comes to the best wine fridges and coolers, there are many types, makes, and models on the market today. If you are the proud owner of a Haier wine cooler model BC112G, then you might be wondering how to turn up the thermostat.
You've just bought a Haier wine cooler model BC112G, and you're looking for ways to turn up the thermostat. Wine fridges are a great investment, but only if they are kept at the right temperature. If your wine fridge is not cooling properly, it can ruin your wine collection.
Haier has made it easy for you to adjust the thermostat on your BC112G wine cooler. All you need to do is follow these simple steps, and you'll be enjoying perfectly chilled wine in no time.
Haier Wine Fridge Temperature Control
In a thermoelectric wine cellar, the actual internal temperature is determined by the ambient temperature. Here is the temperature regulation you need to follow to maintain your wine at the perfect temperature: red wine should be stored at 55-60°F, and white wine should be stored at 45-50°F.
The room temperature will be displayed on the LED when it's initially plugged in, then the interior temperature will be displayed in the display.
Allow your wine cellar to acclimate for at least thirty minutes before making any temperature modifications.
Set the thermostat to the appropriate temperature between 10 degrees Celsius and 19 degrees Celsius. You can control the temperature within a range, but the wine cellar may fail to achieve the desired temperature.
If the room temperature is lower than the wine cellar's programmed temperature, the wine cellar won't work. When the temperature rises above the wine cooler's programmed temperature, cooling begins.
If you want to change the temperature, press the Up arrow to raise the temperature and the Down arrow to lower the temperature.
How to Set Haier Wine Cooler Temperature
- When you've plugged in for the first time, the LED will display the current room temperature.
- Allow the wine cellar to acclimate for at least 30 minutes before adjusting the temperature.
- Adjust the control to the appropriate temperature between 50 degrees Fahrenheit and 66 degrees Fahrenheit. While you can regulate the temperature within a range, the wine cellar may not achieve the desired temperature.
- The wine cellar will not operate if the room temperature is colder than the wine cellar's programmed temperature. When the room temperature rises over the temperature you've selected on the wine cooler, the cooling will begin.
- You may adjust the temperature to your liking by clicking the control panel. There are two buttons that allow you to alter the temperature on the panel. Disconnect the wine cellar's power supply and remove the bottles and shelves. And this is how you'll set your Haier wine cooler temperature.
Why is the Haier Wine Cooler Not Getting Cold Inside?
Condenser Coils are Dirty
The compressor in your Haier wine cooler cools the air that is circulated through the interior of the appliance. The coils located behind the unit need to be free of dust and dirt for the compressor to function properly. If these coils are dirty, the compressor has to work harder to cool the air, which can cause it to overheat and shut off.
To clean the coils, unplug the refrigerator and move it away from the wall. Remove the panel on the back of the unit to expose the coils. Use a brush or vacuum to remove any dirt and debris. Replace the panel and plug the wine cooler back in.
If the refrigerator is not cold enough, the thermistor might be defective. The thermistor is a sensor that monitors the air temperature. It's connected to the control board. If the thermistor is defective, it might not be sending the correct signal to the board, and as a result, the compressor might not turn on when it should.
To test the thermistor, unplug the refrigerator and remove the panel on the back of the unit. Locate the thermistor near the coils and disconnect it from the control board.
Temperature Control Board
The temperature control board governs the compressor and fan. If the control board is defective, it might not send power to the compressor or fan. As a result, the refrigerator will be too warm. Make sure you check all other components to be certain that this is the cause of the problem.
The start capacitor gives the compressor a boost of power when it first starts up. If the start capacitor is defective, the compressor might not start. To test the start capacitor, unplug the refrigerator and remove the panel on the back of the unit. Test the start capacitor with a capacitance meter. If it's defective, replace it.
Evaporator Fan Motor
The evaporator fan motor draws air over the evaporator coils and circulates it through the compartment. If the evaporator fan motor is defective, it might not circulate the air properly, which will cause the refrigerator to be too warm. To test the evaporator fan motor, unplug the refrigerator and remove the back panel. No cold air will get to the refrigerator compartment if the fan isn't working.
Condenser Fan Motor
The condenser fan motor draws air through the condenser coils and the compressor. If the condenser fan motor is defective, it might not circulate the air properly, which will cause the refrigerator to be too warm. To test the condenser fan motor, pull the refrigerator out from the wall and remove the excess panel to access it.
The start relay is one of the components that helps the compressor run. If it's defective, the compressor might not start. To test the start relay, unplug the refrigerator and remove the access panel to the back of the fridge. You'll see the start relay on top of the compressor.
Main Control Board
The main control board regulates the temperature and tells the compressor when to turn on and off. If it's defective, the refrigerator might not cool properly. To test the main control board, unplug the fridge and remove the back panel. You'll see the main control board on the back of the fridge near the top.
Temperature Control Thermostat
The temperature control thermostat regulates the temperature inside the fridge. If it's defective, the refrigerator won't cool properly. You can test the thermostat with a multimeter to see if it's working properly. The thermostat allows the power to follow through the compressor, evaporator, and condenser fan. If the cooling system fans and the compressor are running but the refrigerator isn't cooling correctly, check for an airflow or defrost system problem.
What Temperature to Set Haier Wine Refrigerator
You should set one compartment between 50 and 65 degrees Fahrenheit for red wine and 45 to 50 degrees Fahrenheit for white wine. Red wines can be stored for up to ten years, while white wines can be stored for up to three years.
FAQs on Haier Wine Cooler Model BC112G
Haier wine cooler model bc112g how to turn up the thermostat?
To turn up the thermostat in your wine fridge, simply press the up arrow on the touchpad control panel. The temperature will increase by one degree Celsius with each press. If you need to turn up the temperature more than a few degrees, it's best to do so gradually to avoid shocking your wine.
Where is the thermostat on Haier wine cooler model bc112g?
The thermostat is located on the back of the wine fridge, near the bottom. You may need to remove a panel or two to access it. Once you've located the thermostat, use a screwdriver to turn it clockwise to raise the temperature or counterclockwise to lower the temperature.
What is the best temperature for a Haier wine cooler?
When considering the best temperature for this wine cooler, your wine’s temperature should fluctuate between the optimal 55 degrees Fahrenheit and as low as 30 degrees as long as the vibration occurs gradually.
Final Thought on Haier Wine Cooler Model BC112G
Haier wine coolers have all the characteristics and capabilities to be one of the best brands on the market. The Haier wine cooler model bc112g is a great option for those looking for a quality wine fridge at an affordable price. With its sleek design, easy-to-use controls, and adjustable thermostat, this wine cooler is sure to please any wine lover.