In this article, you're going to learn all the basic methods on how to unclog a toilet when nothing works.
Let's be honest, there is nothing more embarrassing than a stinky clogged toilette. It's bad enough that you have to deal with it, but having guests over isn't even an option.
If you've tried to fix your clogged toilette but you're still left with a bad smell (number 2), then you probably haven't tried any of the methods we're about to show you.
And if you have, you probably must have missed out on some key steps or misused the tools.
But before we get into unclogging clogged toilets, shouldn't we learn about preventing the clogging in the first place?
Let's look at how you can prevent a toilet from clogging before we get to the main business, learning how to unclog that nasty clogged toilette when nothing else works.
Toilet Clog Prevention: How to Prevent Toilet Clogging
Have you wondered what causes a toilet clog? Or better still, how can you prevent a toilet clog from happening?
The better way of eliminating toilet clogs is not allowing them to happen in the first place.
Here’s how you can prevent toilet clogging.
a) Mindfully Flush the Toilet Bowl
How does your toilet-flushing normal routine look like? Maybe you’re the type of person who pours dirty mopping water down your toilet bowl before flushing.
Dirty water may contain small rocks, pebbles, and other objects that may clog your toilet in the long run. It is, therefore, important that you check what you flush down your toilet carefully.
Anything that’s not from your body and is not toilet paper shouldn’t be flushed down the toilet drain.
If you’re sharing the bathroom with other house occupants, you may consider attaching a list of the things that should not be flushed in the toilet on the toilet wall.
This way, you may help control what ends up in your toilet bowl during flushing, even in your absence.
b) Use a Double Flush More Often
Sometimes accumulation of tissue paper in your toilet bowl can lead to a clogged toilet when you flush your toilet. When the toilet papers and poop meet in the bowl, the situation may become worse.
You’ll need lots of water to flush them down the toilet drain effectively. In most cases, the process is never smooth, and water may overflow near the top of the toilet bowl.
It would be best if you considered flushing your toilet in phases. For example, the first phase should be flushing down the poop before throwing in the tissue paper.
The second flushing should be for the tissue paper after you’ve thrown them into the bowl.
If you’re using a dual flush toilet, you might not need to worry about double flushing as the toilets offer powerful flushes that are enough to eliminate the waste in one flush.
c) Clear the Toilet Tank
Toilet tanks are always seen as the extra space for storing bathroom supplies like dish soap, brushes, and tissue papers.
While this may seem convenient, it is not an excellent idea as these items could easily fall into the toilet bowl.
When some of these items get to the toilet drain, you may not easily pull them off, leading to a clog.
d) Trace the Growth of Tree Roots that may Cause a Clog
Clogged toilets sometimes occur due to the interference caused by tree roots when they disturb the normal operation of the main sewer lines.
Tree roots growing next to your house’s plumbing system may reach the pipes, penetrate them and clog them, leading to clogged toilets back in the house.
This is not an easy precautionary measure to achieve. However, if you suspect a tree might be standing too close to the plumbing system, you may need to call a professional plumber for help.
The plumber should carry out an initial inspection to assess the condition of the pipes.
You can then remain to monitor the performance of your toilet and other drainage systems in the house.
e) Never use Strong Chemical Drain Cleaners
Among the many mistakes committed by homeowners, picking the wrong cleaners for toilets is among the most common ones.
When you use one of the strong chemicals for cleaning your toilet, chances are the chemical could ignite a chemical reaction with the drain pipes and corrode them.
If a pipe is corroded, impurities may get into the pipe, leading to the pipes and toilets clogging.
Carry out some research on the available reliable cleaners before you buy one for your toilet.
Top 7 Tricks on How to Unclog Toilet when Nothing Works
After several attempts to unclog clogged toilets, it becomes easier to get frustrated and quit trying.
Clogged toilets are every homeowner’s worst nightmare, but they happen anyway. Worse more, they happen when you have no extra bucks to pay a professional plumber to come and fix them.
It is highly crucial that you learn how to unclog toilet when nothing else works so you can solve such problems when they occur and you can’t hire a plumber.
Here are some of the helpful tricks on how to unclog toilet when nothing else works.
1. Use a Plunger
One of the most tried and tested methods of unclogging toilets is using a plunger.
A plunger qualifies as an excellent tool for unclogging compact and corner toilets installed in a small space.
Plungers come in two versions; one with flange and another that’s heavy-duty built. You can always choose the one that best fits your budget comfortably.
Unclogging toilets using a plunger is easy.
First, you’ll need to wear rubber gloves as a protective measure against toilet water splashing on your hands.
Secondly, grab the plunger by the handle and insert the rubber part into the toilet bowl until you achieve a completely airtight vacuum.
Then start pushing down the plunger slowly as you progressively add more force. Continue doing this repeatedly until you achieve a tighter vacuum, then pull it out once.
When you pull out the plunger, the clog will easily loosen, allowing everything to flow down the drain.
The subsequent flushes will be smoother and easier. However, the method might not work depending on the nature of the plug you’re dealing with.
Do not fret when that happens. You can try the other methods below for the best results.
2. Use a Mixture of Baking Soda and Vinegar
This is the second most reliable method of unclogging a clogged toilet when a plunger fails to offer satisfactory results.
A mixture of baking soda and white vinegar offers a readily available solution to unclog toilets that have been clogged for some time.
Make sure you have soda and vinegar at home before you begin mixing the solution.
Once you have the baking soda, cups, vinegar, bowl/container, and water ready, you can make the solution.
Pour two cups of water and one cup of soda into the bowl/container. Mix the solution thoroughly and pour it into the toilet bowl.
Now pour 2 cups of vinegar into the bowl and give it some time. You can attend to your other kitchen duties as you wait for the vinegar to get deep into the toilet.
The presence of vinegar in the bowl will trigger a reaction that will be noticeable with the presence of bubbles.
This reaction between vinegar and baking soda will cause the materials blocking your toilet to loosen up and allow water to flow freely.
The solution reaches the innermost sections of your toilet that the plunger couldn’t get to.
To easily dissolve the strains of the solution from the toilet, you can add a gallon of boiling water. This will help clear the solution strains within hours.
You should wait for about 6 to 8 hours before you flush the toilet after using this method to unclog toilet when nothing works.
3. Use Dish Soap and Hot Boiling Water
It is funny how the solution to unclog toilet when nothing works could be right in front of you without noticing.
Sometimes all you need to unclog a toilet when nothing works is dish soap and hot water.
To get this done, you’ll need to boil a gallon of water and give it time to cool off to a warm temperature.
Cut a few pieces of the dish wash soap, add them into the toilet bowl, pour the warm water, and give it some time.
After a few minutes, flush the toilet so the solution can get down the drain and push out any remaining clogs.
This is one of the simple solutions that loosen the plug allowing the drain pipe to be free of any stubborn plug.
By now, you should be having a solution on how to unclog toilet when nothing works. However, if that’s not the case yet, there are a few more options you could try.
4. Use a Plumbing Snake
If you have an active, functioning toilet, owning a plumbing snake (Closet Auger) is something you should not think twice about.
A plumbing snake is a flexible wire that’s useful for cleaning toilets. If you’re yet to own one, you can always shop for a plumbing snake in your local stores at affordable prices.
While using this effective tool, you’ll have little to worry about your toilet’s porcelain as it’s fitted with rubber coating to protect the porcelain from scratch.
A plumbing snake is also an effective tool to use if you want to maneuver your way deep down the drain.
It’s crucial that you put on rubber gloves to protect your hands from splashes of liquid waste.
Once everything is set, insert one end of the closet auger into the toilet and push it down the toilet until you feel some resistance from inside.
You can push the tool further while twisting it to push the plug into the drain. Continue performing the movements until nothing is blocking its path to set the water completely free.
Once you’ve achieved zero obstruction, you can now flush the toilet and check how fast the water flows.
A faster flow means the clogs are out of the way, but a sluggish flow means some clogs are still in the path of the water, and you need to redo the process.
5. Use a Wire Coat Hanger
If you have a wire hanger at home, loosen it and straighten it up in readiness for the task ahead.
You can proceed to cover the wire up with an old towel at one end to prevent it from scratching the porcelain. Then wrap up the old towel using duct tape to achieve a good seal around the wire hanger.
This is an ideal method of how to unclog toilet when nothing works, and the clog lingers only a few inches from the drain.
Now insert the covered end of the wire into the bowl, then push it into the drain as you twist it to remove any clog blocking water from moving freely into the drain.
Continue pushing even when noticeable resistances are coming in from the toilet. Only stop when the water starts to drain again.
You can now flush to eliminate any lingering obstruction inside the bowl.
The hanger should achieve the same result as the snake tool. However, in most cases, it doesn’t work because of its limited height. Therefore, if it fails to achieve the desired results, you can use the plumbing snake to finish the work.
6. Use a Suction Cup
Using a suction cup is another right technique of unclogging toilets easily and effectively.
You’ll need to buy suction cups specially designed to suck out small plugs that are blocking the path of water in the drain.
The suction cups are designed with long handles to prevent your hands from getting immersed in dirty, unpleasant water.
To use one, place the suction cup so that it completely covers the hole's bottom hole to create a vacuum so that air won’t pass through.
Now press firmly as you lift and lower the suction cup to create a suction effect that will suck out the plug from the drain.
A suction cup can only suck out small pebbles and will not work effectively with larger ones.
You can use a special hose for the larger pebbles to generate enough force for sucking out the pebbles.
7. Use an Enzyme Product
An enzyme product liquefies waste material in toilets to help unclog them in a quick, successful process.
The product is cheaply available in most groceries and local plumbing stores and is mainly used to disintegrate waste in septic systems.
It only works effectively to eliminate organic waste that is clogging your toilet's drain. Anything besides organic wastes will demand that you use a different tool.
When using an enzyme product to unclog toilets, start by reading the product instructions so you may understand how to use the specific product.
Pour the recommended amount of the enzyme into the bowl and wait for a few minutes for it to work on the clogs.
You can flush the toilet to see whether the waste has been broken down to allow easy water flow.
FAQs on How to Unclog Toilet when Nothing Works
Will a Toilet Eventually Unclog itself?
Unclogging a toilet isn’t one of the easiest or pleasurable tasks around, especially if you’re dealing with a clogged toilet with poop. That explains why many homeowners prefer leaving the toilet until it unclogs itself.
While it’s true that toilets can unclog themselves with time, sometimes they don’t.
A toilet unclogs itself when the cause of the clog is a water-soluble material. However, when the clog is caused by insoluble materials like pebbles, you might be forced to unclog it yourself.
What Solution Do I use to Dissolve Poop Faster?
To dissolve poop faster, you’ll need baking soda, vinegar, and hot water.
You’ll pour a cup of baking soda into the bowl and add the vinegar in little portions to avoid an overflow when the mixture starts to fizzle and bubble.
The poop will eventually dissolve into water and drain away.
Why Does My Toilet Keep Blocking?
If your toilet is regularly clogging, then it’s time you checked the roofing vent that allows fresh air into the toilet to increase flushing pressure.
More often, bird nests and tree leaves clog this vent, thus reducing flushing pressure which causes the toilet to block regularly.
Don’t Wait Until it’s Too Late to Unclog Your Toilet.
Now that you’ve learned about the seven most reliable tricks of unclogging a toilet when nothing else works, you can’t afford to leave your unclogged toilet clogged.
You can try as many of these tips as you can until you eventually get a solution for your clogged toilet.
Start using the cheaply achievable solutions as you advance to those that are seemingly complex.