How To Fix Leaky T&S Brass Kitchen Faucets

A kitchen faucet is one of the most important appliances in your home. It is used multiple times a day and is essential for cooking and cleaning. When a T&S Brass kitchen faucet starts to leak, it can be a major inconvenience.

Luckily, there are a few simple steps you can take to fix a leaky kitchen faucet. In this blog post, we will show you how to fix a T&S Bras leaking kitchen faucet in five easy steps.  In most cases, it can be easily fixed with a few simple tools and some elbow grease within minutes.

So let’s get cracking and fix this nuisance in your kitchen!

T&S Brass sink faucet in use
Picture Credits:

Tools and Materials Needed to Fix Leaking T&S Brass Faucet:

  • Adjustable pliers
  • Allen wrench
  • Flat head screwdriver
  • Rubber gloves
  • T&S Brass replacement cartridge (can be found online or at a hardware store)
  • White vinegar
  • Replacement springs and gaskets

Instructions on How to Repair a Leaky T&S Brass Kitchen Faucet

Video: T&S Brass Faucets – Troubleshooting Leaks.

Shut Off the Water Supply

Before you do anything, you'll need to shut off the water supply to your T&S Brass kitchen faucet. Locate the shut-off valves beneath the sink and turn them clockwise to close them.

Remove the T&S Brass Faucet Handle

Once the water is shut off, you can remove the handle of your T&S Brass kitchen faucet. Use an Allen wrench to remove the set screw that holds the handle in place. Once the set screw is removed, you should be able to pull the handle off. Lift the handle up straight to remove it from the faucet stem.

Remove the Bonnet or Hex Nut

With the handle of your T&S Brass faucet removed, you should be able to see a bonnet or hex nut. Use an adjustable wrench to remove this piece. If the bonnet is stuck, you may need to use a pair of pliers to get it started.

Remove the Collar of T&S Brass Faucet

Under the bonnet, you will find a collar. This piece is threaded and can be removed by hand. Put on a rubber glove to increase traction, grip the collar on the top of the T&S Brass faucet body and turn it counterclockwise. You may need to channel lock pliers to keep things moving.

Remove the Stem

Once the collar is removed, you should be able to pull the stem out of the T&S Brass faucet. If it is stuck, you may need to use a pair of pliers. Remove the stem by pulling it straight up and out of its housing. Use pliers, if necessary, gripping the spindle at the top of the stem.

Remove the Ball, Gaskets, and Springs

The next step is to remove the ball, gaskets, and springs. The ball is located under the stem of your T&S Brass kitchen faucet and is held in place by a screw-on cap. Unscrew the cap with a Phillips head screwdriver and pull out the ball. Remove the gaskets and springs from around the ball. Inspect all of these parts for any damage and replace them if necessary.

Remove Mineral Deposits from T&S Brass Faucet

Mineral deposits can accumulate on the ball, seat washer, and in the T&S Brass faucet body over time. Use a brush and white vinegar to remove any mineral deposits that may have built up. Removing mineral deposits is one of the incredible uses for white vinegar as it helps to soak the deposits. If the ball is cracked or chipped, replace it with a new one.

Install a New Seat and Spring

Once the ball, seat washer, and faucet body are clean and free of mineral deposits, you can install a new seat and spring. Start by inserting the seat into the T&S Brass faucet body. Make sure it is seated correctly, and then screw on the retaining nut. Tighten the nut with a wrench until it is snug.

Reinstall the Stem of T&S Brass Faucet

Apply a small amount of plumber's grease to the o ring at the base of the valve stem. If possible, you can also replace the o ring, which is sometimes included in the T&S Brass repair kit, or the entire stem. Fit the stem into its housing, aligning the tabs on the stem with the slots in the housing.

Push the stem all the way down until it stops. Reinstall the bonnet nut and tighten it carefully with pliers or an adjustable wrench. It should be snug but don't over-tighten, or you may damage the T&S Brass faucet.

T&S Brass sink faucet
Picture Credits:

Check the Leaking and Reinstall the Handle

Turn on the water at the shut-off valves and check for leaks around the base of the T&S Brass faucet. If necessary, use a wrench to tighten the packing nut slightly until the leak stops.

Replace the handle, making sure that it is in the correct position according to T&S Brass's instructions. Some handles have an indicator line or arrow that must be aligned with the stem. Others are keyed so that they can only be installed in one position.

Turn on the water and check for leaks again. If necessary, repeat the previous steps until the leak stops.

Test Your Newly Installed T&S Brass Faucet

Run your newly installed T&S Brass faucet for a few minutes to make sure that it is working properly. Check for any leaks and make sure that the water pressure is adequate. If everything seems to be working properly, you have successfully installed your new T&S Brass kitchen faucet. Note that T&S Brass is one of the best kitchen faucets with sprayers, so it will be able to serve you for a long time without a fix.

FAQs on Fixing a Leaky T&S Brass Kitchen Faucet

What are the most common causes of leaky T&S Brass kitchen faucets?

There can be several reasons for a leaky T&S Brass kitchen faucet, but the most common cause is a worn-out washer. Over time, the washer will become misshapen and no longer provide a tight seal. This can allow water to seep through, resulting in a drip or steady stream of water. 

How to spot the model number on a T&S Brass kitchen faucet?

The faucet comes with a tag that displays the model number along the cold water supply line of the faucet. The model number usually starts with P/N and usually follows this pattern… 6348-T4-AB

How to fix a leak in T&S Brass kitchen faucets?

You can fix a leak in your T&S Brass kitchen faucet by replacing the O-ring seals. These can be found in most repair kits. If the entire T&S Brass kitchen faucet is faulty, then you’ll need to replace your T&S Brass kitchen faucet if you have the knowledge and tools.

How to find a repair kit for T&S Brass kitchen faucets?

If you need a repair kit for your T&S Brass kitchen faucet, you can find one at most hardware stores or online retailers.

What is the best way to clean T&S Brass kitchen faucets?

To clean your T&S Brass kitchen faucet, simply use mild soap and warm water. You can also use a soft cloth to wipe down the faucet. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.

Final Thought on How to Fix a Leaking T&S Brass Kitchen Faucets

Kitchen faucets are very important fixtures, so it's essential to know how to fix a T&S Brass kitchen faucet if it starts to leak. By replacing the O-ring seals, you can easily repair most leaks. If your T&S Brass faucet is still leaking, you may need to replace the entire unit.

If you want to fix a leaking faucet for another brand, then check out our chart below.

Download Free Chart Now!

Your email will be used only to confirm your request and to provide free kitchen information. By submitting your info on this form, you are agreeing to be contacted regarding your service request by means of email. This is no obligation form and doesn’t require you to purchase any service.