The 7 Most Common Pull-Out Spray Kitchen Faucet Problems and their Solutions

Jump to Section

Everyone yearns for a functional kitchen that offers ready solutions on the go. If you’re using a pull-out kitchen faucet, you’ll always want it to spray out water anytime you need water in the kitchen.

While pull-out spray kitchen faucets are highly versatile and work excellently to improve your experience in the kitchen, they are more prone to wear and tear than regular faucets.

Their moving parts tend to wear out faster and you might not enjoy the excellent services for long before you experience a problem.

If you have had enough of pull-out spray kitchen faucet problems, you came to the right place for solutions.

Stay tuned for more on common pull-out spray kitchen faucet problems and their solutions.

The Pull-Out Kitchen Faucet Problems and Their Solutions

Most pull-out spray kitchen faucet problems revolve around the kitchen faucet’s four main components: the pullout sprayer wand, the hollow faucet spout, the chrome pull-out hose, and the flexible faucet hose.

Regardless of where the problem emanates from, you should know what to expect and how to handle the problems when they come.

Here are some of the 7 most common pull-out kitchen faucet problems you’re likely to encounter with your faucet.

1.  Pull out Faucet not Retracting

This is a common problem with pull-out kitchen faucets and shouldn’t be a call for tension as this doesn’t always mean your faucet is entirely damaged.

Mostly when the pullout sprayer fails to retract, you’ll normally have to push it back manually, a process that’s always tiresome and unnatural.

In their making, pull-out hoses are designed with an extra weight attached to them that causes them to retract due to gravity.

When the hose fails to retract, it could be that this weight has fallen off and it needs to be checked.

Alternatively, it could be that the hose is old and is sticking to the faucet’s side.

The solution to Non-Retractable Pull-out Faucets

Once you’ve noticed a non-retractable hose, you need to first check under the sink to find out if the hose is still attached to the faucet. If it’s detached, you can easily reposition it to the right place as you shift the weight up and down until the hose is perfectly repositioned.

If you notice your faucet’s spray hose or wright is tangled to the water pipe valve, you can also solve this by moving the valve up and down to untangle the spray hose. Doing this can also help the faucet to start retracting.

For the weight issue, if you notice your faucet’s weight is not perfect in place, you can adjust or add weight to the faucet with the help of a screwdriver.

Check your local store or at Amazon for new spray hose weight that you can attach to your faucet.

2.  A Clogged Diverter Valve

Without the diverter valve, water couldn’t possible get to the spray hose from the faucet spout.

Anytime you turn on the faucet, the hot or cold water flows into the spray hose and continues to flow into the faucet where the diverter channels it to the sprayer head.

When you continually use your faucet, the diverter valve attracts mineral deposits and becomes dirty or clogged making it to dysfunctional.

A clogged diverter can lead to lower water pressure and other associated problems.

The solution to a Clogged Diverter Valve

Begin by switching off the water valves before you unscrew the water handle screw using a flathead screwdriver.

Once done, proceed to remove the handle and expose the faucet’s cap by turning the cap in an anticlockwise direction.

Remove the exposed cam so you can get to the faucet ball assembly and remove them as well.

After that, you can now remove the spout by moving it back and forth until it loosens up and comes off.

Check the front end of the faucet’s stem to locate the diverter and remove it so you can clean away the clogged dirt particles using vinegar.

You can then return the diverter to its position in the kitchen faucet after cleaning and drying it.

In the same order, you removed the other parts of the faucet, return them one after the other and close the faucet tightly using the flat head screwdriver.

Make it a routine of cleaning the diverter occasionally to avoid the same problem from recurring.

Remember, anytime you turn on the water after removing the sprayer and you notice a weak flow, the problem is mostly a clogged diverter. Ensure you clean the diverter immediately you notice this.

3.  Low Water Pressure

 

Credits: Photo by Kristine Wook on Unsplash

The low water pressure might be caused by several factors, but the most common remains the accumulation of mineral deposits in the aerator in your faucet’s head.

The condition becomes worse if you’re using hard water in your kitchen sink.

But there’s no call for alarm as solving this problem involves easy steps that you can do alone.

The Solution to Low Water Pressure: Cleaning the Aerator

You’ll first have to remove the aerator from the end of the main spout by unthreading it in a clockwise direction using your hands.

However, if the aerator is stuck and is giving you a hard time turning with your bare hands, you can use a pair of pliers to open it.

But be careful not to dent its surface with a strong grip of the pliers. You can wrap masking tape on the pliers’ jaws to reduce the effect of the grip.

With the faucet spout now wider open, you can check if any aerator parts are stuck inside it using a screwdriver or your finger.

Pry out any parts that are stuck inside the spout using a screwdriver then clean out any remaining debris and deposits from inside the spout.

Now take apart each part of your aerator using a paperclip, toothpick, or any other sizeable pointy object. Remember to take note of how each part is assembled before taking them apart. You can take pictures to refer to later.

You can clear off large pieces of sediments stuck in the holes of the aerator.

Take the seemingly clean parts and dip them into vinegar or use a damp cloth dipped in vinegar to clean them. This helps to dissolve all the mineral deposits.

Finally, rinse, reassemble and reattach the aerator to the spout by turning it anticlockwise. Ensure you tighten it as hard as you can with your bare hands.

4.  A Leaking Pull-out Hose

It could be the pull-out hose is old and worn out or the hose connection wasn’t done perfectly leaving some loose ends allowing which allow water to flow.

More often, you are likely to record leaks at each end of the hose connection. The best solution to such a problem is to buy a new hose and connect it afresh instead of buying a new faucet unit.

A leaking pull-out hose can make your kitchen sink messy and therefore needs a quick solution.

The Solution to a Leaking Pull-out Hose

Begin by turning off the water valves situated under your kitchen faucet so you won’t have to worry about water flowing in during the process.

Proceed to unscrew the weight of the hose beneath the sink to remove it if it’s still screwed. Then disconnect the hose from the water supply to completely do away with any water flowing into the hose as you work on it.

If your faucet has plastic weights under the sink, now is the time to release them. You shouldn’t remove them before disconnecting the water supply as you do with the other types of weights.

Now pull out the worn-out problematic hose through the faucet spout and replace it with a new hose, which you should slide down the kitchen faucet in the same way.

If you’re using a plastic weight, you should slide them back into position now before attaching the hose to the water supply.

Once done, attach the hose to the water supply using the same process you used when removing it. Only do it in the reverse direction.

After fitting back the hose, you can now screw back the screw-on weights.

Now turn on the water and check closely if there are any leaks before you leave.

5.  A Leaking Spray Head

A leaking spray head is one of the main pull-out spray kitchen faucet problems that you will always have to contend with.

This is the main problem that no faucet owner wishes to happen to them very soon. A leaky spray head is only solved by replacing it. You need to get a new spray head and perfectly fix it in place before you continue using your faucet.

The good news is, replacing a spray head isn’t a demanding task and once you have your tools right, you can always get your way around easily.

The Solution to a Leaking Spray Head

Begin by turning off the water valves under your sink.

Once done, go ahead to unscrew the old spray head using your flathead screwdriver to expose the C-clip and take it off.

With the old C-clip now out, you need to attach the new spray head, an equally straightforward process.

Attach the new C-clip then follow it up with a washer. With the two already fixed, you can use your screwdriver to screw in the new spray head into position.

Once you have installed a new sprayer head, ensure you occasionally unscrew it to clean off the dirt that usually collects on the sprayer head. This way you’ll optimize its performance and minimize the chances of premature leaks.

6.  Faucet Spout and Body Doesn’t Sit Perfectly on the Cradle

 

Credits: Photo credit: Perfectance on Visualhunt

Another problem with faucets you should generally expect is a spout or body that doesn’t sit perfectly on the cradle after continually using it with time.

Sometimes, it is all about the type of kitchen faucet you choose to buy. Cheaper models tend to have this problem more often than the slightly advanced and expensive models.

Manufacturers of the advanced faucet models add a system of magnets that will enable the faucet spout to sit in the holder for a longer time.

The Solution to a Faucet Spout and Body not Sitting Perfectly on the Cradle

If you’re using the cheaper versions of kitchen faucets, you may not have much choice than to budget for a replacement as soon as possible.

However, for the advanced options, you can always buy a new magnet ring and replace it with the old, powerless one to help your kitchen faucet work perfectly well.

You can do it yourself at home. Simply close the water, unscrew the nozzle, and let lose the hose from the end of the spindle.

You can easily remove the magnet from one end of the spindle, and get the new magnet in place without much struggle.

Once the new magnet is in place, push back the hose up the end of the spindle, screw up the nozzle, and turn on the water.

Your new magnet will ensure your kitchen faucet remains in position for a long time coming before you worry about the magnet again.

7.  Sticking Water Handle

The majority of the pull-out faucets will come with a water handle that helps you get water anytime you need some. The water handle is fitted with a small lever on the handle that you can always push to release water, the same way a sprayer works.

As is common with every other type of button, continuous pressing makes the button weak and unresponsive, hence sticking inside anytime you press it.

Photo by James Yarema on Unsplash

While mostly the sticking is caused by wear and tear, a buildup of grime and dirt along the lever can also cause the water handle to stick.

When the sticking is due to wear and tear, you may need to replace the handle entirely. However, if it is due to the dirt buildup, all you need to do is clean it up and the handle will get back to functional shape.

You need to understand how to remove and clean the button before returning it to the water handle.

The Solution to a Sticking Water Handle

Turn off the water flow before you start the process.

Check around the faucet handle to check where the button is located. The button is usually on the top or side of the faucet handle.

Once you’ve located it, use a flat head screwdriver to pop out the button. Ensure you take extra care while popping out the button so that it doesn’t break.

However, if it does break accidentally, you can always order a replacement online and fix it.

Remove the screw inside the button to loosen the faucet handle. Once you’ve pulled it off, you can either replace it with a new one or clean it to get rid of the dirt clogs.

FAQs about Pull-out Spray Kitchen Faucet Problems

Why does my sink sprayer not work?

More often, when your sink sprayer fails to work, the main problem is always with the diverter.

You can always check this by removing the sink sprayer head and turning on the water. If the water flow is weak, you should start budgeting for a new diverter and replace it soon.

What’s the cost to replace a kitchen sink faucet?

When things get out of control and you need an entirely new kitchen sink faucet, the question of price and cost comes in.

Averagely, you can expect to spend anything between $100 and $500 for a new faucet. The price varies depending on the faucet’s finish, features, and style.

How do I solve hard water issues with kitchen faucets?

Hard water doesn’t augur well with kitchen sink faucets. Therefore, if you’re living in a hard water area, you should look for kitchen sink faucets that are specifically designed for hard water.

Go for faucets that have inbuilt ceramic layers to keep mineral deposits from sticking and clogging your faucet.

You Don’t Have to Worry about Pull-out Spray Kitchen Faucet Problems Anymore

While you can’t eliminate pull-out spray kitchen faucet problems, you can easily solve them when they occur.

Kitchen faucets will always be faulty regardless of the type and design you’re using. You only need to master your way around the solution for each problem.

Remember to always assess if the problem needs a full replacement or just a part of the faucet to help you save on cost and time.

Dino Paccino

Dino Paccino

Dino is a lifelong writer and home improvement specialist. He enjoys bringing cutting-edge information on home renovation and remodeling to Kitchen Infinity.

Related Articles

Download Free Chart Now!

Your email will be used only to confirm your request and to provide free kitchen information. By submitting your info on this form, you are agreeing to be contacted regarding your service request by means of email. This is no obligation form and doesn’t require you to purchase any service.

norton_black
comodo_black