How Do You Reset A Frigidaire Ice Maker

Jump to Section

If you're like most people, you probably take your refrigerator's ice maker for granted. It just works, right? Well, sometimes things go wrong with the ice maker and it can be tricky to figure out how to fix it.

In the world of home appliances, Frigidaire is a well-known brand, and its ice makers are a popular option for many houses. These practical devices create a consistent supply of ice for beverages, cooking, and a variety of other uses. But Frigidaire ice makers can develop problems and stop functioning properly, just like any other product. To maintain your ice maker operating effectively, it's critical to recognize the issue and take action to solve it.

In this article, we will show you how to reset the ice maker and some tips on how to keep it running smoothly. Here's all you need to know. 

Frigidaire Refrigerator Ice Maker Not Making Ice | D & T Appliance Service

Image Credit: https://www.dtappliance.com/

Resetting A Frigidaire Ice Maker 

Frigidaire ice maker not working? If your Frigidaire ice maker in your freezer isn't working, the first thing you should do is reset it. With a little troubleshooting, you may be able to get it up and running again without having to call a technician.

Here's how to reset the ice maker: 

  1. Unplug the refrigerator from the power outlet.
  2. Locate the ice maker, shut off the valve and turn it to the “off” position.
  3. Wait at least 24 hours before turning the valve back to the “on” position.
  4. Plug the refrigerator back in and wait for the ice maker to cycle through and produce ice cubes.

If this doesn't work, you may need to thaw out the ice maker. See the next section for instructions on how to do this. 

Thawing Out A Frozen Frigidaire Ice Maker

If your ice maker is frozen, you'll need to thaw it out before you can reset it. Here's how to do this: 

  1. Unplug the refrigerator from the power outlet and turn off the ice maker shut-off valve.
  2. Remove the ice bin from the freezer and set it aside.
  3. Using a hairdryer, heat up the area around the ice maker until the ice begins to melt. Be careful not to overheat any plastic parts.
  4. Once the ice has melted, turn on the shut-off valve and plug the refrigerator back in.
  5. Wait for the ice maker to cycle through and produce ice cubes.

If your ice maker is still not working after following these steps, it's time to call a technician. 

Additional Troubleshooting Steps to Fix a Frigidaire Ice Maker Not Working

There are a few actions you may take to troubleshoot and remedy the problem if you think your Frigidaire ice maker isn't functioning properly. Here are a few potential answers:

  • Check the water line for obstructions and remove them: If your ice maker's water supply line is blocked, it won't be able to work properly.
  • Check the water line for obstructions and remove them: If your ice maker's water supply line is blocked, it won't be able to work properly. Check for and remove any obstructions in the water line to see if that resolves the problem. Before trying to use the ice maker once more, defrost the water line if it is frozen.
  • If necessary, check the water inlet valve and replace it: The ice maker's water supply is managed by the water inlet valve. Check the valve's functionality by testing it. If not, a replacement will be required.
  • Inspect the ice maker control arm and potentially replace it: The ice manufacturing process is started and stopped by the ice maker control arm. The ice maker won't operate correctly if it's broken or stuck. Check to see sure the control arm is operating properly. If not, a replacement will be required.
  • The ice maker motor should be examined and perhaps replaced because it turns the ice tray and ejects the ice. The ice maker won't be able to make ice if it malfunctions. To make sure the ice maker motor is operating properly, check it out. If not, a replacement will be required.
  • Make sure the ice maker is installed correctly before using it because it might not work properly if it wasn't. Verify that the ice maker is set up correctly in accordance with the manufacturer's instructions.

These troubleshooting techniques should assist you in locating and resolving any issues with your Frigidaire ice maker. It is advised that you get help from a professional if you are unable to handle the problem on your own.

Possible Causes Of A Frozen Frigidaire Ice Maker

There are several possible reasons why your ice maker might be frozen. The most common reason is that the water line is frozen. This can happen if the water line is exposed to cold air or if there is a leak in the line.

If a Frigidaire ice maker isn't functioning properly, there are a number of possible reasons. Here are a few typical examples:

  • Water line that provides your ice maker with water may be clogged or frozen, which will prevent it from working properly. You must find and remove any obstructions in the water line or thaw a frozen water line in order to resolve this problem.
  • Water inlet valve malfunction: The water inlet valve regulates the water flow into the ice maker. The ice maker won't get enough water to manufacture ice if it isn't functioning properly. The water inlet valve can frequently be tested and perhaps replaced to resolve this problem.
  • The ice maker control arm, which is defective, is in charge of halting and restarting the ice production process. The ice maker won't operate correctly if it's broken or stuck. This problem should be resolved by inspecting and maybe replacing the control arm.
  • Ice tray rotation and ice ejection are done by the ice maker motor, which can break down. The ice maker won't be able to make ice if it malfunctions. The ice maker motor should be examined and perhaps replaced to resolve this issue.
  • Installation error: If the ice maker was not installed properly, it might not work properly. Verify that the ice maker is set up correctly in accordance with the manufacturer's instructions.. 

Symptoms of a Frigidaire Ice Maker Not Working

There are various symptoms that could point to a malfunctioning Frigidaire ice maker. Here are a few typical signs to be on the lookout for:

The most obvious indication that there is a problem with your ice maker is when no ice is created. If the ice maker isn't making any ice, there can be an issue with the engine, ice maker control arm, or water supply.

A issue with the water supply, the control arm, or the motor may be at blame if you notice that your ice maker is producing less ice than it formerly did.

If your ice maker is making peculiar noises, such as grinding or humming, it may be an indication that a component is broken.

Ice maker not receiving enough water: The ice maker won't be able to make ice if it is not receiving enough water. A frozen or clogged water line, a broken water entry valve, or both may be to blame for this.

If you find water dripping from your ice maker, it may be due to a broken water entry valve or a break in the appliance itself.

Tips For Keeping Your Frigidaire Ice Maker Running Smoothly

There are a few things you can do to keep your ice maker running smoothly and prevent it from freezing up.

First, make sure that the water line is not exposed to cold air. If it is, insulate it with foam pipe insulation. Second, check the shut-off valve regularly to make sure it is working properly. If it isn't, call a technician to replace it. Third, if you notice any leaks in the water line, have them repaired immediately. Leaks can cause water to build up in the ice maker and freeze it.

Following these tips should help keep your ice maker running smoothly. 

Choosing The Best Nugget Ice Maker For Your Kitchen

While many people think of a couple of types of ice cubes when they think of an ice maker, there are actually several different types of ice that can be made with an ice maker. One type of ice that has become increasingly popular in recent years is nugget ice.

Nugget ice is small, pellet-like pieces of ice that are soft and easy to chew. Experts have talked about best pellet ice maker in case you want to have a read.

They are perfect for adding to drinks or for use in a cool summertime treat. If you're thinking of adding a nugget ice maker to your kitchen, here are a few things to keep in mind. 

First, decide what size nugget ice maker you need. Nugget ice makers come in both countertop and freestanding models. Countertop models are smaller and take up less space, but they may not produce as much ice as a freestanding model.

Second, think about how much ice you need. If you entertain often or have a large family, you'll need an ice maker that can produce a lot of ice. But if you only need ice for occasional use, a smaller model will suffice.

Third, consider your budget. Nugget ice makers range in price from around $100 to $1,000 or more. Choose the one that fits your needs and budget.

Finally, read reviews before making your purchase. 

Frigidaire 26 lb. Portable Countertop Ice Maker in Stainless Steel EFIC117-SS

Image Credit: https://www.homedepot.com/

FAQs about Frigidaire Ice Maker Not working 

How Do I Fix Ice Maker Frigidaire?

If you want to fix your Frigidaire ice maker, there are a few things that you can try. First, make sure that the ice maker is turned on and that there is power running to it. Next, check the water supply line to see if it is frozen or kinked. If so, thaw the line or replace it. Finally, check the fill tube to see if it is clogged. If so, clean it out or replace it.

This will help you find the best nugget ice maker that is well-made and reliable.

How Do I Force My Frigidaire Ice Maker To Cycle?

If you want to force your Frigidaire ice maker to cycle, you can reset it by pressing and holding the reset button for 5 seconds. This will cause the ice maker to go through a complete cycle.

Where Is The Reset Button On Frigidaire Ice Maker?

The reset button on a Frigidaire ice maker is usually located behind the control panel. To access it, you will need to remove the control panel. Once you have removed the control panel, you should be able to see the reset button. Press and hold it for 5 seconds to reset the ice maker.

Final Thoughts On How Do You Reset A Frigidaire Ice Maker

In conclusion, if you have a Frigidaire ice maker that isn't working properly, you can try resetting it. This process might not work for all models, but it's worth a try if you're having trouble with your ice maker.

Although having a Frigidaire ice maker in your house is convenient, sometimes it develops problems that prohibit it from working properly. Ice not being made, ice production slowing down, weird noises coming from the ice maker, water not entering the ice maker, and water seeping from the ice maker are some typical signs that a Frigidaire ice maker isn't working.

A clogged or frozen water line, a broken water intake valve, a faulty ice maker control arm, a bad ice maker motor, and improper installation are all potential causes of a Frigidaire ice maker not working.

A Frigidaire ice maker that isn't working can be fixed by clearing any clogs in the water line, checking and possibly replacing the water inlet valve, checking and possibly replacing the ice maker control arm, checking and possibly replacing the ice maker motor, and making sure the ice maker is installed correctly.

To ensure effective operation, it's crucial to properly maintain and promptly repair your Frigidaire ice maker. Don't be afraid to ask a professional for help if you are unable to resolve the problem on your own.

Finally, here are the top refrigerator brands to avoid and consider this year when making a purchase.

Ryan Copley

Ryan Copley

Having spent years participating in bathroom, kitchen, and home renovations, Ryan uses this experience to write informative blog posts on a wide variety of home renovation and kitchen topics.

Related Articles

Download Free Chart Now!

Your email will be used only to confirm your request and to provide free kitchen information. By submitting your info on this form, you are agreeing to be contacted regarding your service request by means of email. This is no obligation form and doesn’t require you to purchase any service.

norton_black
comodo_black