How To Reset Zokop Ice Maker

From time to time, your Zokop ice maker may stop working properly due to a power surge, power outage, or other unforeseen event. If this happens, don't panic—most ice maker problems can be easily fixed with a quick reset. 

In this blog post, we'll show you how to reset your Zokop ice maker so that you can get back to enjoying frosty drinks as soon as possible. Keep reading to learn more.

Zokop ice maker
Picture Credits:

My Top Tips To Try

The following are the top tips you can try if your Zokop ice maker isn't working:

Video: How to Reset under counter Ice maker

1. Check To Make Sure That The Zokop Ice Maker Is Turned On.

While this may seem obvious, it is always worth checking to make sure that your Zokop ice maker is turned on. Sometimes, the ice maker can be turned off by accident and this will prevent it from working properly.

To check if the ice maker is turned on, look for a switch or power button on the Zokop ice maker itself. If you cannot find a switch or power button, check your user manual for more information.

2. Try Resetting Zokop Ice Maker.

If the ice maker is turned on and it still isn't working, you may need to try resetting it. This can often fix minor issues with the Zokop ice maker and get it working again.

To reset the Zokop ice maker, unplug it from the power outlet and then plug it back in. Once it is plugged back in, press and hold the power button for 5 seconds. This will reset the ice maker and hopefully get it working again.

3. Clean The Zokop Ice Maker And Make Sure There Is No Build-Up Of Ice Or Water That Is Blocking It From Working Properly.

If the Zokop ice maker is still not working after you have tried resetting it, you may need to clean it. Over time, ice and water can build up inside the ice maker and this can block it from working properly.

To clean the Zokop ice maker, start by unplugging it from the power outlet. Then, remove any ice or water that has built up inside it. Once the ice maker is clean, dry it off and then plug it back into the power outlet.

4. Make Sure That The Water Line Going To The Zokop Ice Maker Is Not Frozen Or Blocked In Any Way.

If there is no build-up of ice or water inside the Zokop ice maker and it is still not working, you may need to check the water line going to it. Sometimes, the water line can become frozen or blocked, which will prevent water from reaching the ice maker.

To check the waterline, start by unplugging the Zokop ice maker from the power outlet. Then, locate the water line going to the ice maker and make sure that it is not frozen or blocked. If the water line is frozen, thaw it out with a hairdryer. If the water line is blocked, try flushing it out with warm water.

Zokop ice maker water lines
Picture Credits:

5. If All Else Fails, You May Need To Call A Professional To Come And Take A Look At Your Zokop Ice Maker.

If you have tried all of the tips above and the Zokop ice maker still isn't working, you may need to call a professional to come and take a look at it. A professional will be able to diagnose the problem and recommend the best course of action.

Resetting A Zokop Ice Maker – FAQ

Why did my Zokop ice maker stop working?

There are plenty of reasons why your Zokop ice maker has stopped working, but here are the most common reasons.

  1. Water supply has frozen
  2. Clogged water supply
  3. Inadequate power supply (tripped circuit or a blown fuse)

How long does it take for Zokop ice maker to reset?

Normally it takes anywhere between 5-10 minutes to reset a Zokop ice maker.

Where is the reset button on the Zokop ice maker?

The reset button is usually located at the bottom of the Zokop ice maker unit or in some cases at the top or on the bottom of the ice tray. Once located, press the button down for a few seconds until you hear a beep sound. Once reset, check if the problem has been solved. 

How do you fix an ice maker that is not making ice?

To fix a Zokop ice maker that is not making ice, start by checking the water supply and making sure that the unit is turned on. If that doesn't solve the problem, you may need to empty the unit and clean it according to the manufacturer's instructions.

Final Thoughts On How Do I Reset My Zokop Ice Maker?

In conclusion, resetting your Zokop ice maker is a pretty easy process. You just need to follow the steps that are laid out in this article and you should be able to do it without any issues. Just make sure that you disconnect the power before you start working on it and then reconnect it once you're done.

We have instructions for resetting ice makers of other brands than Zokop in the chart below. Be sure to check it out.

Download Free Chart Now!

Your email will be used only to confirm your request and to provide free kitchen information. By submitting your info on this form, you are agreeing to be contacted regarding your service request by means of email. This is no obligation form and doesn’t require you to purchase any service.