Which Position is Hot for Delta Kitchen Faucets

Jump to Section

A one handle faucet is designed to be a better way to get the ideal water temperature. Instead of fiddling with a balance between hot and cold water, you can simply adjust it through the different temperatures until you find the ideal one. Single handle hot and cold faucets also come with a scald guard, which is controlled by an adjustable knob.

This knob helps to ensure that the water temperature does not get too hot, which can be dangerous. When it comes to delta kitchen faucets, there are three main types of faucets: single handle, double handle, and touchless. Each type has its own advantages and disadvantages, so it's important to choose the right one for your needs.

Previously, we have discussed Delta Faucet installation, about installing laminate flooring in kitchen or touchless kitchen faucet electrical wiring and installing vinyl plank flooring in kitchen.

Read on to understand how to change hot and cold water on a single handle faucet:

On a Single Handle Faucet, Which Way is Hot?

The first thing to check when adjusting a faucet is which side is hot water on your sink. Usually, on a double knob faucet, then tap on the right controls hot water while the tap on the left controls cold water. This also applies to single handle faucets. However, both types of faucets are supplied by two supply lines located underneath the sink.

Why a Faucet Gets Too Hot

There are two main reasons a single handle faucet may be producing hotter water than expected. The first is that the water mixture is wrong, and you're getting more water from the hot valve than the cold, thus making the water come out hotter. Second, there may be an issue with your scald guard, it might be set at a high temperature.

The scald guard is usually in the form of a plastic disk that stops you from turning the faucet too far in one direction. If it's set high or is worn out, your faucet can end up producing dangerously hot water.

How to Adjust a Too Hot Faucet

Adjusting the water temperature on a single faucet is fairly straightforward like any other home DIY project. You'll follow the same process whether you're adjusting the water temperature of your kitchen faucet or bathroom faucet.

Turn the Hot and Cold Water Valves Off

First, you'll need to turn off both the hot and cold water valves under your sink. For extra precaution, it's also a good idea to turn off the main water valve for your home. There should be no water coming out of the faucet when you lift the handle.

For most faucets, you'll hand-turn the valve's knob. In some cases, you may need an adjustable wrench to turn off the water. Turn each knob counterclockwise to turn off the water supply. Turn on your faucet to ensure the water supply is off before removing the supply lines.

Remove the Handle from the Faucet

Remove your single handle by loosening the screw holding it in place. You'll see two screws under the handle, the screw on the left controls hot water, while that on the right controls cold water. To lower water temperature, you either need to tighten the hot water screw or loosen the cold water screw. Replace the faucet and test your new water temperature with a thermometer.

Adjust the Temperature on the Valve

Adjust the Temperature on the Valve
Image credit: https://diyhomerepairandremodeling.com/

If your handles are separate for hot and cold water, then the valve itself will have settings for temperature. The knob on the top of the valve controls hot water while the one on the bottom controls cold water. To lower water temperature, you'll want to turn the knob for hot water clockwise to decrease the amount of hot water coming out.

Disconnect the Water Supply Lines

If you want to lower the water temperature coming out of your faucet even further, you can disconnect the hot water supply line from the valve. This is usually located under your sink. Disconnect the supply lines by twisting the nut that attaches to the supply line to the cut off valve counterclockwise with a wrench.

Once it's disconnected, turn on the cold water and let it run for a minute or two to clear out any residual hot water that's still in the line. Reconnect the line when you're finished.

Turn on the Shut Off Valves and Check for Leaks

With the water supply lines still disconnected, turn on both the hot and cold shut off valves underneath your sink. Check all of the connections for leaks. If there are no leaks, turn off the valves and reattach the supply lines. If there is a leak, shut it off right away, remove the nut and retighten it. Make sure you know how to fix a leaking delta kitchen faucet before touching anything because you can damage your entire faucet if you don’t know how to fix the leak.

Replace the Handle and Test the Water Temperature

Now you can replace the handle on your delta kitchen faucet. Check to make sure that the handle is in the correct position and then turn on both the hot and cold water valves. Test the water temperature to see if it's where you want it to be. If not, adjust the shut off valves accordingly. Use a thermometer to check that the water temperature is below 120 degrees Fahrenheit.

How to Adjust Water Mixture

Remove the Single Handle

Depending on the faucet, you can pry off the small plastic cover concealing the retaining screw using a flat screwdriver. You can also opt to remove the retaining screw from underneath the handle.

Adjust the Water Mixture

Adjust the Water Mixture
Image credit: https://s3-us-west-1.amazonaws.com/

Some faucets have two small adjustment screws underneath the handle. The screw on the left controls hot water, while the screw on the right controls cold water. To increase water temperature, either turn the hot water screw counterclockwise or turn the cold water screw clockwise.

Other faucets have either small plastic nubs that you can turn by hand or with pliers to adjust the hot or cold mixture or a temperature adjustment ring to rotate clockwise to adjust the water temperature.

FAQs on Hot and Cold Water Position in Delta Kitchen Faucet

What are delta kitchen faucets?

Delta kitchen faucets are a type of faucet that is designed to be installed in the kitchen. They are typically made from stainless steel or other corrosion-resistant materials, and they often have two handles – one for hot water and one for cold water. They are considered some of the best kitchen faucets with sprayer available on the market.

Where is the model number on the delta kitchen faucets?

The model number is typically located on the underside of the faucet body, near the base.

How do I know if my delta kitchen faucet is hot or cold?

There are a few ways to determine whether your delta kitchen faucet is hot or cold. First, look for a small plastic nub that you can rotate to indicate whether the water is hot or cold. Second, look for a red dot on the handle of the faucet – this usually indicates that the water is hot. Finally, you can always consult your delta kitchen faucet manual to double-check.

Final Thought on Hot and Cold Water Position on Delta Kitchen Faucets

Installing a delta kitchen faucet is a great investment that any homeowner can make. Not only do they offer a wide range of styles and finishes to choose from, but they are also built to last. When it comes to the hot and cold water position, be sure to consult your delta kitchen faucet manual before making any decisions. With a little bit of research, you should be able to find the perfect position for your delta kitchen faucet.



Kristina Perrin

Kristina Perrin

Kristina is an expert DIY home remodeler and mom to three. When she's not cooking or experimenting with new recipes, you can find her working on new home improvement projects or writing about her favorite kitchen appliances or DIY projects on Kitchen Infinity blog.

Related Articles

Download Free Chart Now!

Your email will be used only to confirm your request and to provide free kitchen information. By submitting your info on this form, you are agreeing to be contacted regarding your service request by means of email. This is no obligation form and doesn’t require you to purchase any service.