Have you turned on your faucet and discovered that the water coming out is colored and not clear like it used to be? If so, don't freak out. While discolored water can indicate a problem with your home's plumbing, there could be other causes as well.
In addition, many homeowners take the hot water coming from their faucet for granted. When hot water shuts off suddenly, it can cause disruptions and inconveniences to your daily activities.
Read on to learn the causes and DIY fixes of both of these plumbing problems.
Pressure Has Changed in Your City's Water Lines
If you have noticed that the water pressure in your home has changed, it may be due to work being done on the municipal water lines. This can cause sediments to become disturbed and enter your home's plumbing system through the pipes. The city water lines can build up a lot of sediment over time, and when the pressure changes, it can cause this sediment to break loose and enter your home's water supply.
As a result, those particles can travel from city water lines to your water supply line. Then, when you turn on the water, the sediment can cause the water to appear brown or discolored. The good news is that this problem will go away on its own in a few hours or less.
Until the problem goes away, refrain from using your water heater so that you can keep the water inside as clean as possible. And to prevent future water quality problems, you may consider installing a point entry of water filtration system. This type of system is installed in your home's basement and filters all the water coming into your home from the main water line.
Another common reason for brown or discolored water is frozen pipes. This problem is more common in the winter months when the temperatures outside are colder. When water freezes inside your pipes, it can cause them to expand and crack. This can lead to sediment getting into your water and making it appear brown or discolored.
A frozen pipe means that water cannot travel successfully to your taps. Before winter, you should get the pipes insulated to decrease the chance of them freezing and causing water discoloration. If you have frozen pipes, you can warm them up by applying a hairdryer, heat gun, or heating pad.
Aging Plumber Pipes
Another potential problem is your plumbing pipes. If you have an older home, the pipes may be made of materials that are no longer used today, such as galvanized steel. These materials can break down over time and cause brown or discolored water.
Galvanized steel pipes were designed with a protective zinc coating to keep the metal from corroding. Unfortunately, the coating wears off as the pipes age, and the corrosion on these pipes begins on the inside, where you can't see.
As rusts start to build up on a pipe's interior, pieces can flake off into your water supply, making the faucet water become discolored. If you believe that your pipes are to blame, take a look at the water coming out of all your different faucets. If only the kitchen faucet has brown water, it's likely a problem with the individual pipe rather than the main water supply. It's best to involve a professional plumber to address the problem.
A Broken Water Main Line
If all the faucets in your home are discoloring your water, it's likely that there is a problem with the main water line. This is a serious problem because it could mean that contaminants are getting into your water. Even though a water main line can last for a long time, it can break due to problems such as earth movements, shifting soil, or invasive tree roots.
When this happens, soil can start infiltrating your otherwise clean water. If you suspect that the main water line is to blame, call your local water company right away to repair or replace the pipe. This involves excavation, which is digging into the ground to perform the repair or replacement.
Corrosion in Your Tank Water Heater
If the water coming out of your kitchen faucet is discolored, but the water from other faucets in your home is not, it could be due to corrosion in your tank water heater. Over time, the sacrificial anode rod inside your water heater breaks down and needs to be replaced.
This rod is made of magnesium or aluminum and is designed to corrode in order to protect the steel tank from corrosion. When the sacrificial anode rod breaks down, it can no longer perform its job, and the steel tank begins to corrode. If you have plumbing prowess, you can easily find the right sacrificial anode replacement and replace it yourself.
A professional plumber can easily perform it for you. If replacing the nod doesn't solve the problem, your water heater may have severe corrosion issues, making it prone to leaks. In this case, it's best to start looking for a new water heater before a major leak occurs.
The kitchen faucet aerator is a mesh screen that covers the faucet outlet. Over time, mineral deposits and other debris can build up on the screen and clog it. As a result, your water pressure may become low, or you may notice that your water has a strange taste or smell as well as color.
Use channel lock pliers and tape or a towel to unscrew the aerator from the end of the tap. Once it's off, look for anything dirty or clogged in the mesh screen. Clear the aerator by rinsing it. You can also use distilled white vinegar, a very soak, and a soft brush to clean the aerator.
Faucets that have a single handle often have a cartridge inside the handle. These cartridges can become clogged or blocked by a hard water buildup, which produces low water pressure in your plumbing fixtures. The main function of a faucet cartridge is to regulate water flow through the faucet, but when it clogs, it can cause a decrease in water pressure.
Turn off the water valves under the sink. After that, run the water in the sink to release any pressure that might be in the lines. Next, remove the valve handle by locating and removing the screw cap and screw which holds the faucet. Use an Allen wrench to remove the valve handle, then pry up the decorative cover and washer. Remove the cartridge, clean it with white vinegar, rinse, and reassemble your faucet.
If you can't find your model number, take a photo of your faucet and bring it to a hardware store for help finding a replacement cartridge.
Shut Off Valve Handle Problems
If the water pressure in your home is low but only in one fixture or location, the problem may be with the shut off valve for that particular faucet or appliance. If you can find the shut off valve, turn it all the way on and see if that solves the problem. If not, there may be a problem with the valve itself, and you may need to replace it.
FAQs on Why There's No Discolored Water
Why is there a lot of sediment coming through my bathroom and kitchen faucets?
The most common reason is that the city's water lines are old and contain a lot of rust or other sediments. Another possibility is that your home's pipes are old and need to be replaced.
Why would the water come out of the kitchen sink brown and clear in all other faucets?
There could be a number of reasons why water would come out of the kitchen sink brown and clear in all other faucets. One possibility is that the city's water lines are old and contain a lot of rust or other sediments. Clogs in the aerator and cartridge may also be causing the brown water. If your faucet parts or water supply lines are not to be blamed, then consider replacing your faucet with the best kitchen faucet with sprayer to avoid future water coloration.
Final Thought on Why There's No Discolored Water In Other Faucet
Other faucets lacking discolored water in your whole house can be due to many different reasons. Once you've identified the cause, it's important to take the necessary steps and measures to resolve the issue. Whether it's fixing water line damage, replacing an aerator, or cleaning out a cartridge, solving the problem will give you clean and clear water in all your faucets.